CEN-SWPOE-16

16-Port Managed PoE Switch

  • CEN-SWPOE-16: Angled
  • CEN-SWPOE-16: Front & Rear Headon

16-Port Managed PoE Switch

CEN-SWPOE-16

A 16 port Gigabit Ethernet switch with PoE+ in an AV-friendly rack-mount form factor.

More Details


The CEN-SWPOE-16 offers control system networking made easy, providing Crestron® guaranteed performance and reliability for a complete Ethernet network of touch screens, control processors, servers, and other devices in a single-space rack mount package. All 16 ports are Gigabit capable to ensure maximum bandwidth for multimedia and critical control data. All ports are located on the rear of the unit while the front panel provides clear indication of each port's status, providing an ideal form factor for use in a typical 19" AV equipment rack. Customizable front panel labeling makes it easy to designate each port with a friendly, descriptive name.

Power over Ethernet (PoE) is furnished simultaneously across all 16 ports, providing a centralized power source for numerous PoE powered devices and eliminating the need for cumbersome power supplies and extra wiring. The CEN-SWPOE-16 provides full PoE (802.3at Type 1) from all 16 ports simultaneously. It also supports PoE+ (802.3at Type 2) from any port, delivering a maximum of 34.2 Watts per port up to a total of 255 Watts for all ports. PoE at each port can be switched on and off via a Crestron control system allowing equipment to be shut down to save power when not needed.

Advanced configuration of the CEN-SWPOE-16 is enabled through an intuitive Web browser interface. Port mirroring capability allows for monitoring and troubleshooting.

  • 32 Gbps switching fabric (non-blocking)
  • All ports support 1000Base-T Gigabit Ethernet
  • Also supports PoE+ (802.3at Type 2) powered devices
  • Auto-negotiating and auto MDI/MDIX
  • AV friendly, single-space rack-mount design
  • Configured via simple-to-use Web browser interface
  • Customizable front panel labeling
  • Layer 2 managed switching functionality
  • LLDP (Link Layer Discovery Protocol) support
  • PoE switchable per port via a control system
  • Port configuration settings for speed and duplex
  • Port mirroring capability
  • Provides full PoE (802.3at Type 1) on all ports simultaneously
  • Provides up to 34.2W per port, 255W total
  • Rack-mount 16-port managed Ethernet switch

10/100/1000 POWER OVER ETHERNET 1 – 16 (16) 8-wire RJ45, female;
10/100/1000Base-T Ethernet ports and PoE Power Sourcing Equipment (PSE) outputs;
Supports IEEE 802.3at Type 1 PoE, Class 0-3 (15.4W) power sourcing at all ports simultaneously;
Supports IEEE 802.3at Type 2 PoE+, Class 4 (34.2W) power sourcing from any ports up to the maximum specified power capabilities;
Maximum 34.2 Watts per port, 255 Watts total
100-240V~50/60Hz 3.5-1.6A (1) IEC C14 male chassis plug, main power input;
Mates with removable power cord, included
COMPUTER (front) (1) USB Type B female;
USB computer console port (6 ft cable included);
For setup only
G (1) 6-32 screw, chassis ground lug
Depth 10.06 in (256 mm)
Height 1.73 in (44 mm)
Width 17.28 in (439 mm);
19.0 in (483 mm) with ears
Chassis Metal, black finish, fan-cooled, vented sides
Faceplate Aluminum, black finish with polycarbonate label overlay
Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)
Heat Dissipation 171 BTU/hour
Humidity 10% to 90% RH (non-condensing)
Temperature 32° to 104°F (0° to 40°C)
MAC Addresses Up to 4K
Network Standards IEEE 802.3, 802.3u, 802.3ab, 802.3bc, 802.3af, 802.3at Type 1 and 2
Ports (16) 10/100/1000Base-T auto-sensing Gigabit Ethernet w/PoE
Switch Fabric 32 Gbps non-blocking
Transmission Method Store-and-Forward
10/100/1000 POWER OVER ETHERNET 1 – 16 (rear) (2) LEDs per each of (16) Ethernet ports, left green/amber dual-color LEDs indicate Ethernet link status and speed for each corresponding port, right amber LEDs indicate Ethernet activity for each corresponding port
ACT 1 – 16 (16) yellow LEDs, indicate Ethernet activity for each corresponding port
LINK/SPEED 1 – 16 (16) green/yellow dual-color LEDs, indicates Ethernet link status and speed for each corresponding port
POE 1 – 16 (16) green LEDs, indicate PoE is active and a PoE powered device is connected to each corresponding port
PWR (1) green LED, indicates operating power supplied via main power input
Main Power 3.5-1.6 Amps @ 100-240 Volts AC, 50/60 Hz
6.4 lb (2.9 kg)

Available Models
Available Accessories